💈 Why your wireless hair clipper pulls on your hair and how to prevent it
Nothing as annoying as this scenario:
You grab your cordless clipper, ready for a quick touch-up.
The first strokes go fine… and then — ouch!
The clipper pulls, plucks, hesitates.
Recognizable? You are not the only one.
For men who shave their hair at home themselves, this is the most common problem: a clipper that pulls instead of cutting smoothly.
Fortunately, the solution is often simple. In this blog you will discover:
-
Why a clipper pulls hair
-
How you can fix that in 5 minutes
-
How to keep your cordless clipper in top shape
-
And which premium models (like those from Revahs.nl) make the difference
⚙️ Why does a clipper pull your hair?
A clipper should cut hair sharp and smoothly, not pull.
Pulling means: the blades do not move fast or precisely enough. The hair is practically “grabbed” and pulled out.
The main causes in home use:
-
Dull blades – Over time, blades lose their sharpness.
-
No oil or too little lubrication – Friction causes the blades to run stiffly.
-
Buildup of dirt or hair residues – Reduces the movement speed of the blades.
-
Crooked or loose blades – Poor alignment leads to uneven cutting.
-
Empty battery or power loss – You notice this immediately with cordless clippers.
The result? A painful, uneven haircut and frustration you could easily have avoided.
🧰 Here's how to fix it — step by step
Below you will find a maintenance routine every man should follow.
It takes you at most 3 minutes after each haircut, but saves you months of frustration.
💦 Step 1. Clean after every cut
-
Use the brush that comes with your clipper.
-
Remove all hair residues between the blades.
-
Only use water if the clipper is water-resistant (check manual).
-
Let everything dry well.
🔹 Pro tip: Hair + skin oil = friction. Regular cleaning extends your blade's lifespan up to 2× longer.
🛢️ Step 2. Oil your blades
-
Apply 2 drops of clipper oil to the blade.
-
Turn on the clipper for 10 seconds so the oil spreads.
-
Wipe off excess oil.
🔹 Wahl and BaByliss recommend oiling before each use. Even with cordless models.
🔹 Never use WD-40 or kitchen oil. Only genuine clipper oil (available at revahs.nl).
⚖️ Step 3. Check the alignment
-
Check if the top and bottom blades run nicely parallel.
-
Is there a misalignment? Carefully tighten the screws.
-
A misalignment = immediate pulling.
🔹 Revahs tip: Especially check this after a fall or transport. Luxury clippers are precisely calibrated and you notice small deviations immediately.
🔋 Step 4. Check your battery
An empty battery = less power = pulling.
Preferably use:
-
A fully charged clipper, or
-
A model that also works on mains power (hybrid function).
🔹 Premium cordless clippers from Revahs maintain constant power, even at low battery percentage — something cheaper models don't do.
🧴 Step 5. Use the right attachment comb
Too short = risk of pulling, especially with thick or curly hair.
-
Always start with a longer comb.
-
Work in shorter steps.
-
Let the clipper glide and don't push too hard.
🧔 For the modern man: why maintenance pays off
A good cordless clipper is an investment.
But just like with a car, it only stays powerful if you maintain it.
✅ Regular cleaning and lubricating =
-
No pulling or snagging
-
Constant cutting power
-
Longer lifespan
-
Professional results at home
In short: good maintenance = sleek hair every day, without a barber.
🔝 Premium cordless clippers for home (recommended by Revahs)
At Revahs.nl you will only find clippers that are truly built to perform smoothly for years.
Below are some favorites among men who shave their own hair:
💎 Revahs Clipper One – Cordless Clipper
The ultimate choice for those who want quality and comfort.
-
Quiet motor, powerful battery with 7200 rotations per minute
-
Ceramic precision blades that don’t get hot and last longer
-
Includes maintenance oil and brush
-
Up to 240 minutes of cordless use
➡️ View the Revahs Clipper One »
❓ Frequently Asked Questions
"Can I clean my cordless clipper under the tap?"
Only if the model is 100% waterproof. Always check the manual. Most professional clippers are detachable, but not fully waterproof.
"Does oil really help against pulling?"
Yes. Oil reduces friction, keeps the blades cool, and extends their lifespan. Without oil, you get faster hair pulling, overheating and noise.
"When should I replace blades?"
On average after 6–12 months of regular use.
If you still notice pulling after proper maintenance: replace the blades or have them sharpened.
"My clipper is making more noise, is that normal?"
A slight increase due to wear is normal.
Does the sound become rough or shaky? Then it's time to clean and oil.
✅ Summary: 5 steps to a pain-free haircut
| Step | Action | Result |
|---|---|---|
| 1 | Clean after each use | No dirt or hair residue |
| 2 | Lubricate with clipper oil | Less friction, no pulling |
| 3 | Check blade alignment | Constant cutting power |
| 4 | Full battery or mains power | Stable power |
| 5 | Work with the right attachment comb | Sharp, even result |
💬 Finally
A clipper that pulls is not a sign that you are doing something wrong. It is a sign that you are missing maintenance.
With a little care, you get the most out of your wireless clipper, and enjoy a sharp haircut whenever you want.
Choose smart. Choose quality.
👉 Check out our luxury wireless clippers on Revahs.nl and experience the difference.
